Showing posts with label home-sound-system. Show all posts
Showing posts with label home-sound-system. Show all posts

Tuesday, January 6, 2015

Installing Device Karaoke Sound System For Home

Installing device karaoke Sound System for home


Sometimes to eliminate the sense of fatigue in a grueling routine of our thoughts and feelings, then it must be made to relax. One solution is to karaoke with colleagues at the Karaoke place in your city. This unity will make us forget for a moment the fatigue in work activities. Maybe you are invited by a friend who loves to sing but you feel awkward when singing that was witnessed by another person, it will certainly make you nervous, may not know the songs you sing well in rhythm tone, poems and lyrics. Therefore you need a lot of exercise without being seen by others. How to? Of course you should have in your home karaoke facilities. do not have to choose the device that expensive if your financial condition is not sufficient to buy a sound system and completeness of your karaoke at a price which is too expensive. But if you want to get good sound quality of course you have to be good at choosing a karaoke sound quality, it is the price to determine the quality.

 Invite your friends to understand enough about the karaoke sound system equipment and how to setup and installation of voice quality that is found in your ear. meanwhile if you have the space / room unused, you can magic into your mini studio or home theater in your home by providing soundproof material. This is to minimize audible noise to a neighbor's house. Frankly I also like to sing, but there is a sense of shame that my voice be heard by a neighbor or interfere with them.

 As a recommendation for you, you try to look at some options and steps you should take before buying this karaoke device. Here are some simple equipment, but can be a reference for you.


Music Player Source

You can use the DVD player of good quality from well-known products. Disk song must be of good quality, not pirated. If you have a notebook device / PC / laptop, then you can install the program karaoke player, but to display you'll have to use a special cable to connect your PC to the display equipment. now available MIDI Karaoke Player Mechine in which there is the hard drive that can hold millions of songs on it. You can upgrade the song by plugging the USB or the Internet. aat you want to play your favorite song quite see menu available there. Usually in the Karaoke Player already includes facilities for the microphone and echo. If this facility is not there then you are forced to use a separate audio mixer for sound mixing process and both music and microphone.

Display equipment

To display the video image of karaoke, we can use the TV input terminal suppose there are plugs AV Input (Audio Video Iinput), VGA input, or the now popular is HDMI. However, we can simply use the AV input jacks for video facility drawings. For that much money you can also use the following projector screen. By using the projector, the image luminate look wider.

Microphone Equipment

Somewhat difficult choosing a good microphone. Sometimes there are cheap price but quite to your taste. As a recommendation for you to try using a Shure SM58 Microphone. If you want to be free to move should use a wireless microphone.

Audio Mixer Equipment

Look for the Audio Mixer already contained therein Sound FX (effects / Echo). When the mixer Audio FX setup you try to use the FX Reverv or Hall. Take a look at the following image source;

Speaker System (Loud Speaker) Equipment

It feels strange sounds that do not use the karaoke Speaker System. Therefore this system speaker equipment becomes vital when you karaoke. Speaker function is to play back and strengthen our voice. There is a wide variety of speakers this system you need to know;

Speaker Active Stereo 8 inchi,
These speakers can be a recommendation for you, the price is pretty cheap, but in it already contained Microphone jack and also effect is Echo. These speakers are two of the same size but one of the boxes are in the form of voice control volume, bass, and treble. Audio jack input terminal for normally use the RCA jacks on the back of the speaker's body.

Speaker Active Mono 12 inchi

To produce stereo sound speakers in the use of this then you must have two speakers with the same brand and type (one set). The price is quite expensive and also power consumption is quite large. in response to a more complete range of voice and get the low bass sound better then equipped with an active woofer speaker as shown above. These speakers are mounted on either side of the display (operating device)

 Passive Speaker

If you want to use Passive Speaker then you have to use your Power Amplifier for pushing or moving the speakers.

 Installation Karaoke Sound System Equipment

There are various ways to install the system on your karaoke equipment. This installation is divided according to the condition of the equipment you have. for live video connections you connect the video out on the DVD player to your TV AV1 input. Adjust the position of the remote to get this video signal.

A.  Active speaker 8 inch Installing

The simplest installation with Active 8-inch speaker. For your microphone to the microphone jack can be strikingly Mic 1 and 2 on the active speaker box 8 "is. It could also plug the mic to plug microphon contained in VCD player. You see diagram above image. In 8-inch active speaker can also be included with audio mixer facility when you enough financial funds to buy the audio mixer.

B. Passive Speaker installation using a Power Amplifier (PA) and the Audio Mixer


Before installing this equipment stacking position of the device in a special container cupboard or shelf. Place the audio mixer in the top position. Position Power Amplifier (PA) were at the bottom. Measure the short length of cable between Power and Speaker. Try not to be too long. To connect the speaker cable from the Power Amplifier is connect the red wire to the positive terminal on the speaker box and the black to the negative terminal on the speaker box. The position of the right side speaker connected to the path (R) in PA and left to (L). Consider the diagram below picture;

C. Installation Using Mono Active Speaker 12 Inch

In the speaker box is equipped with a PA and Tone Control, so you no longer need the addition of an external Power Amplifier. You simply adjust the position of the Volume, Bass and Treeble the flat position (12 o'clock), then you just set all sorts Level and Tone EQ only on Audio Mixer. diagram exactly the same picture in the picture above, namely living facility negates Power Amplifier. So that you can sound at a particular frequency ut my suggestion is to use the Equalizer (EQ).

 Audio Check

After all devices attached to the neat now we are trying to advance the sound to be generated by the microphone. Set the level and effect till found Tone and echoes which you steady. When you are good enough, adjust the level of the music and adjust the balance between your vocal with karaoke music. to eliminate the singer's voice on Disk stay pressed the remote, hear audio (L) or (R). Now you will enjoy your voice as a singer Karaoke.


Good luck and practicing karaoke songs.!!

Monday, December 28, 2009

The Test System

Article By :Rajinder Gill
Before we go on to look at some of the PC software and hardware out there, I'll offer up a quick overview of the test system. Some of the components used really are out on a limb with price tags that are not for the faint of heart. In audiophile currency, I probably have what amounts to a mid-budget system. If your interest is in low budget products, be warned that the rest of this page will probably make your stomach churn.
 However, you've not been forgotten and we will add a few suggestions here and there should you have champagne tastes on beer budgets - as most of us probably do, especially in this time of credit crunch.


Real Hi-Fi owner and Supravox distributor Matthew Jameson was kind enough to provide us with a pair of test speakers based upon Supravox Signature Bicone Drivers known as the Transparence from a company called 3D Sonics. The Bicone Signature driver is a high efficiency (claimed 96dB sensitive) wide bandwidth design featuring a whizzer cone to supplement high frequency reproduction while the main cone takes care of the rest. The parameters of these drivers make them eminently suitable for an open baffle design like the Transparence.

If you keep your ear to the ground in loudspeaker circles, you'll know that open baffle loudspeakers have made a marked resurgence over the last five years or so. One of the chief perpetrators of this revival was a fellow named Throsten Loesch. Thorsten publicized his build of the Supravox Bicone Sig's using the very design that went on to become the 3D Sonics commercial venture. The remarkable simplicity was just what many in the DIY audio community were looking for: an easy to build high performance loudspeaker that could use a variety of drivers according to budget. I had the pleasure of listening to these speakers around five years ago at Thorsten's house; needless to say, it was an experience I never forgot. The absence of a walled cabinet allows the sound to fly out in all directions creating a soundstage that simply makes the loudspeaker drivers disappear.

All good things come with a slap around the cheeks and here's the part that the standard "boom 'n tizz" audio loving public won't like: the price tag is around £2400 UKP for a pair of these beauties. In audiophile markets, a price tag like this is hardly sweat inducing as there are plenty of high-end designs that cost multitudes more. If you are worried about the price, there's no reason to fret as DIY'ing a pair yourself that should get within 95% of the commercial model is not out of the question.

Stock signature Bicone drivers are available for DIY endeavors from Supravox USA, Supravox France for the EU, and direct from Real Hi-FI for the UK at around a third of the cost of the "ready to go" Transparence. If that's still too much for you, another door is open by using the budget friendly Visaton B200 driver with suitable baffle adjustments to suit its parameters.

The Transparence design is fiendishly simple: a single driver in a 6'x4' acrylic baffle that uses an aluminum L-bracket as a stand and as a means of providing additional rigidity to the baffle. There's no crossover as the driver covers the range of 50 Hz to 15 KHz on its own. That's most of the audible range covered by a single point source. While the top-end extension is enough even for super ears, the low-end obviously needs augmenting with a subwoofer for bass heavy music. For this purpose I use a Linn AV 5150 subwoofer crossed over at around 48 Hz that integrates very well with these speakers, especially when we use DRC to level some of the room response abnormalities.

Whether or not you have the financial clout to buy the fully fledged 3D Sonics Transparence, it's certainly worth investigating the sonic landscape that open baffle designs can create. The availability of drivers for just about every budget leaves the onus of their use squarely in the hands of the DIY'er. Don't pass up the chance to try them out.